Cap Mould with Motor -Detergent Bottle Cap
According to its molding characteristics, the plastic part structure and its injection molding mold are designed.
First, the characteristics of the molding process of the plastic part are analyzed, and then the geometric model of the plastic part is created using CAD (Pro/E). According to the structural characteristics and molding requirements of the plastic part, the parting surface is selected, the gating system is designed and the number of cavities are determined, and the strength and rigidity of the cavity are checked; the internal thread on the plastic part is formed by the thread core, The motor drives the chain and the sprocket to rotate, the sprocket drives the gear, and the gear drives the mandrel to rotate.
Combined with the sequential parting structure, the thread core is automatically unthreaded; the oil seal method is used to solve the problem of the rotating thread core. cool down. Using CAD, the assembly drawing and parts drawing of the injection mold for the plastic part of the detergent bottle cap were designed, and the manufacturing process of the molded part was compiled.
According to its molding characteristics, the plastic part structure and its injection molding mold are designed.
First, the characteristics of the molding process of the plastic part are analyzed, and then the geometric model of the plastic part is created using CAD (Pro/E). According to the structural characteristics and molding requirements of the plastic part, the parting surface is selected, the gating system is designed and the number of cavities are determined, and the strength and rigidity of the cavity are checked; the internal thread on the plastic part is formed by the thread core, The motor drives the chain and the sprocket to rotate, the sprocket drives the gear, and the gear drives the mandrel to rotate.
Combined with the sequential parting structure, the thread core is automatically unthreaded; the oil seal method is used to solve the problem of the rotating thread core. cool down. Using CAD, the assembly drawing and parts drawing of the injection mold for the plastic part of the detergent bottle cap were designed, and the manufacturing process of the molded part was compiled.